Code of Colorado Regulations · Regulation Number 11

What's inside

• PART AGeneral Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing
• PART BStandards and Procedures for the Approval, Operation, Gas Span Adjustment, Calibration and Certification of the Division Approved Test Analyzer Systems for Use in the Basic and Enhanced Areas and Test Analyzer Systems for Licensed Dealers in the Enhanced Area
• PART CInspection Procedures and Requirements for Exhaust Emissions, Fuel Evaporation Control, Visible Smoke Emissions, Emissions Control Systems, On-Board Diagnostics (OBD); and Practices to Ensure Proper Emissions Related Adjustments and Repairs
• PART DQualification and Licensing of Emissions Mechanics, Emissions Inspectors, and Clean Screen Inspectors; Licensing of Emissions Inspection and Readjustment Stations, Inspection-Only Stations, Inspection-Only Facilities, Fleets, Motor Vehicle Dealer Test Facilities, Enhanced Inspection Centers; Qualification of Clean Screen Inspection Sites; and Registration of Emissions Related Repair Facilities and Technicians
• PART EProhibited Acts and Penalties to Ensure Proper Inspection Procedures, Adherence to Prescribed Procedures and Effective Emissions Related Repairs
• PART FMaximum Allowable Emissions Limits for Motor Vehicle Exhaust, Evaporative and Visible Emissions for Light-Duty and Heavy-Duty Vehicles
• PART GHigh-Emitting Vehicle Program
• PART HStatements of Basis, Specific Statutory Authority and Purpose
• Appendix ATechnical Specifications
• INTRODUCTION
• 1.0.GENERAL
• 1.1.Design Goals
• 1.2.Useful Life
• 1.3.Nameplate Data
• 1.4.Manuals
• 1.4.A.Reference Operating Instructions
• 1.4.B.Operation Instruction Manual
• 1.4.C.Maintenance Instruction Manual (limited)
• 1.4.D.Initial Start-up Instructions
• 1.4.E.Allow easy use.
• 1.4.F.Prevent accidental loss or destruction.
• 1.5.Certification Documentation
• 1.5.A.
• 1.5.B.Functional specifications.
• 1.5.C.Functional flowcharts of the software.
• 1.5.D.Example inputs and outputs from all processes.
• 1.5.E.
• 1.5.F.
• 1.6.Warranty Coverage/Mandatory Service Contract
• 1.7.Tampering Resistance
• 1.8.Manufacturer Provided Services
• 1.8.A.
• 1.8.B.
• 1.8.C.
• 1.8.D.
• 1.8.E.
• 1.8.F.
• 1.9.Certification Requirements
• 2.0.CONSTRUCTION DESIGN
• 2.1.Materials
• 2.2.
• 2.3.Mobility
• 2.4.Electrical Materials/Construction
• 2.5.Sampling System
• 2.6.Storage Temperature
• 2.7.Operating Temperature
• 2.8.Humidity Conditions
• 2.8.1.Temperature Control
• 2.9.Barometric Pressure Compensation
• 2.10.Operational Design
• 2.10.A.Analytical System
• 2.10.B.Readout Display/CRT Screen
• 2.11.Automatic Calibrations
• 2.11.A.Automatic Leak Check
• 2.11.B.Automatic HC Hang-Up Check
• 2.11.C.Vehicle Diagnostics
• 2.11.D.Dilution
• 2.11.E.Engine Tachometer
• 2.11.F.Analytical Bench Accuracy
• 2.11.G.Drift
• 2.11.H.Warm-Up
• 2.11.I.System Response Time Requirements
• 2.11.J.Optical Correction Factors
• 2.11.K.
• 2.12.Gas Calibration File
• 2.13.Microcomputer Specifications
• 2.13.A.
• 2.13.A.1.control each of the analyzer functions and time of function;
• 2.13.A.2.examine and obtain values from all of the analyzer sensors;
• 2.13.A.3.read and write information to diskette in standard DOS format; and
• 2.13.A.4.
• 2.13.B.
• 2.13.B.1.
• 2.13.B.2.
• 2.13.B.3.
• 2.13.C.
• 2.13.D.
• 2.13.D.1.each test performed;
• 2.13.D.2.
• 2.13.D.3.
• 2.13.D.4.audit sequence:
• 2.13.D.4.a.
• 2.13.D.4.b.
• 2.13.D.4.c.
• 2.14.Standard Hardware: Minimum Required Configuration
• 2.14.1.Operating System
• 2.14.2.Processor
• 2.14.3.
• 2.14.4.Power Up Sequence
• 2.14.5.Video
• 2.14.6.Floppy Disk
• 2.14.7.Hard Disk
• 2.14.8.
• 2.14.9.Keyboard
• 2.14.10.Bar Code Scanner
• 2.14.11.Hard Disk Expansion
• 2.14.12.Additional Storage
• 2.14.13.Communications
• 2.15.Required Printers
• 2.15.A.
• 2.15.B.
• 2.15.C.
• 2.16.Clock/Calendar
• 2.17.Lockout Notification
• 2.18.Vehicle Diagnosis
• 2.19.Software Loading
• 3.0.DISPLAY PROMPTS AND PROGRAMMING CRITERIA REQUIREMENTS
• Attachment IPDF 1000 Scanner
• Attachment IIThermal Transfer Printer
• Attachment IIIColorado Automobile Dealers Transient Mode Test Analyzer System
• Attachment IVSpecifications for Colorado 97 Analyzer
• INTRODUCTION
• 1.0.GENERAL
• 1.1.Design Goals
• 1.2.Useful Life
• 1.3.Nameplate Data
• 1.4.Manuals
• 1.4.A.Reference Operating Instructions
• 1.4.B.Operation Instruction Manual
• 1.4.C.Maintenance Instruction Manual (limited)
• 1.4.D.
• 1.4.E.Allow easy use.
• 1.4.F.Prevent accidental loss or destruction.
• 1.5.Certification Documentation
• 1.5.A.
• 1.5.B.Functional specifications.
• 1.5.C.Functional flowcharts of the software.
• 1.5.D.Example inputs and outputs from all processes.
• 1.5.E.
• 1.5.F.
• 1.6.Warranty Coverage/Service Contract
• 1.7.Tampering Resistance
• 1.8.Manufacturer Provided Services
• 1.8.A.
• 1.8.B.
• 1.8.C.
• 1.8.D.
• 1.8.E.
• 1.8.F.
• 1.9.Certification Requirements
• 2.0.HARDWARE SPECIFICATIONS
• 2.1.General
• 2.2.Span Gases
• 2.3.Audit Gases
• 3.0.SOFTWARE COMPONENTS
• 3.1.Communication and Data Field Specification
• 3.2.Society of Automotive Engineers (SAE) “J” Standards
• 3.3.OBD II
• 3.4.Forms
• 3.5.Upgrades
• Vehicle Inspection Report – Passing Form
• Vehicle Inspection Report – Failing Form
• Attachment VSpecifications for Colorado On-Board Diagnostic (OBD) Stand-Alone Analyzer
• INTRODUCTION
• Design Goals
• Pass/Fail Requirement
• Readiness Monitors
• Keyless Ignitions
• OBD Retest Requirements
• OBD Fraud Prevention
• OBD Equipment Requirements
• Gas Cap Tester
• Opacity
• Recording of Test Results/Documentation
• Computers and Peripheral Requirements
• VID Communications Overview
• Printer
• Power and Telephone Cord
• Power Requirements
• Construction
• Materials
• Mobility
• Electrical Design
• Bar Code Scanner
• Additional Specifications
• Functional Specifications
• Warranty Coverage
• Tampering Resistance
• Auditing Requirements
• Manufacturer Provided Services
• Certification Requirements
• Attachment VI“Colorado Approved” Calibration Span Gas Label Samples
• Appendix BStandards and Specifications for Calibration/Span Gas Suppliers [Repealed eff. 11/30/2014]

Plain-English summaries